The Versa Stack consists of three steel cymbals bolted together with jingles, bent, and hammered to produce a quick and aggressive stack and “clap” sound. It comes in three sizes (12”, 16”, and 20”). Note: The 12” is held together with rivets instead of adjustable bolts.

Maintenance Care and Instructions:

1. The Versa Stack has raw steel elements finished with a coat of polyurethane and paste wax. Make sure to keep the instrument dry and if it gets wet, dry it immediately.

2. If surface imperfections or rust develop, I recommend using a buffing pad, steel wool, or high grit sanding block to remove the corrosion. Then use a bit of Paste Wax or non-water based protective finishing agent to protect the exposed steel.

3. Do not store the Versa Stack zipped in a case or in a damp environment for long periods of time as this can trap moisture and increase the risk of rust developing.

4. The raw steel we use is very thin and bends easily. If you are concerned about the bends you can bend them back into shape by (gently) stepping on the bent areas over a rug or by using your hands. This does not affect the durability of the product.